1. Intelligent color-changing system, the dehumidification effect is clear
2. High moisture absorption material sio2, reusable, economic and environmental protection
3. The third generation of all-round moisture absorption hole, moisture absorption and drainage efficiency is higher
4. Charging can be turned back, energy saving and environmental protection
Packing list
Host *1, power cord *1, instruction *1
Instructions for
1. When using it for the first time, please check whether the hygroscopic particles in the display window are orange. If they are dark green, please turn on the power and restore them to orange.
2. When the hygroscopic particle on the display window is orange (DRY), the dehumidifier can start dehumidification. Place the dehumidifier in a damp proof space such as a closet or cabinet.
3. When the moisture absorption particles in the dehumidifier display window are dark green, it means that the dehumidifier has been saturated with moisture. Please power on for 12-15 hours, until the desiccant color of the display window turns orange, it means that the moisture has been completely discharged, and the dehumidification force is restored as new. It means that the moisture has not been completely discharged, please continue to plug in the electric heating for a few hours).
Matters needing attention
1. Hygroscopic speed varies with different environments, humidity and seasons, and also affects the color change speed of hygroscopic particles in the display window.
2. When the regeneration is powered on, the color change rate and color drop are normal phenomena. If the display window has not changed back to orange for 15 hours, it means that there is still moisture that has not been completely discharged; Please continue to plug in the heating for a few hours.
3. This product is a low power consumption product, and it will not cause any harm to the product or environment even if it is plugged in for longer than the recommended time.
4. When the product is powered on, the power indicator light will light up, and the fuselage will produce a little heat is a normal phenomenon.
5. When the product is powered on, avoid cover, so as not to damage the product.
6. When the product is powered on, the display window presents water vapor and hygroscopic particles to discharge moisture, producing a weak sound, which is a normal phenomenon.
7. When the product is powered on, please keep a distance of more than 10 cm from other items to increase air convection and avoid damage to the product.
8. Do not soak in water directly to avoid damage or leakage.
9. Children and the elderly should be used under supervision and guidance.
10. If any abnormality (such as peculiar smell) is found, please turn off the power as soon as possible. Do not repair by yourself to avoid danger.
The hygroscopic card is made of high temperature and flame retardant material. When charging, the central temperature is 170 ° C and the surface temperature is 50-55 ° C. The T200 hygroscopic card is charged flat. Mischarging can cause display window problems.
