Ziglite- SZ- finger stretching rehabilitation therapy device
Model: SZ
Product Description: focus on giving stroke patients proper passive hand stretching exercises every day, with stretching exercises of different strength and speed, so as to promote the rehabilitation of hand muscle tension. Increase the response and conduction of stimulating hand neurons.
1. the passive exercise rehabilitation trainer is combined with flexible drive pipe and soft polymer materials to ensure that the patient will not suffer secondary injury during the training process
2. the muscle driving mode is chimed with the human anatomical joint position, and the degree of freedom is consistent with the hand joint, simulating the human kinematics mechanism, and can be dynamically adjusted according to the patient's motion state
3. the passive training mode adopts fully automatic design, which helps to promote the recovery of muscle strength of the affected hand, increase the range of motion of the joint, and promote the emergence of active flexion and extension movement
4. mirror training can map the action mode of the healthy hand to the affected hand, and stimulate mirror neurons through mirror movement to promote the remodeling and recovery of brain function and hand function
5. home based training to promote home-based rehabilitation training for patients with hand rehabilitation journey, which can maintain the results of hand rehabilitation training in medical institutions, help patients grasp the rhythm of hand rehabilitation training, and promote hand rehabilitation journey
Packing list: host, training gloves *1, mirror gloves *1, power cord *1, instructions
Operating instructions:
1. place the trainer host on the desktop, not on the wet, soft cloth or unclean desktop
2. connect the air pipe of the training glove to the air pipe connector of the trainer host. (please connect the mirror glove USB connector to the mirror glove interface during mirror training)
3. insert the DC plug of the power adapter into the DC plug of the trainer. Note: when the training gloves are connected, rotate and tighten the air pipe connector clockwise to the corresponding interface of the host
4. the guardian shall help the patient to wear gloves, extend the fingers to the top of the finger cover, and then pull the glove Velcro to the wrist for bonding and tightening (Note: the patient's hands are in the "functional" or "neutral" position during training, not in the rest position)
5. turn down the "power switch" key of the trainer host until it is turned on, and the "power switch" key turns on
6. press the start / stop button to start and stop the training at any time (Note: during the mirror mode training, the healthy hand needs to grasp and press the mirror glove button to start the training glove grasping movement, and release the mirror glove button to start the training glove stretching movement)
7. turn up the "power switch" key of the trainer host until it is turned off, and the machine will be powered off and stopped
8. the training time for each startup is 30 minutes, and it will stop automatically when the time is up
9. press the force key to increase or decrease the force. There are 4 gears in total, which can be adjusted according to their own conditions
Precautions:
Please read the manual carefully before use and operate in strict accordance with the manual
1. do not disassemble, repair or modify the components of the equipment by yourself to avoid causing abnormalities of the trainer
2. do not store components in or near the water heater, microwave oven, cooking equipment or high-pressure container to avoid fire caused by overheating
3. do not sterilize or autoclave. Do not continue to use when there is an alarm
4. please prevent liquid or foreign matters from entering the trainer, and do not store it in the environment of disinfectant gas or active gas, so as to avoid damaging internal electronic components and causing faults
5. it is suitable for passive and mirror motion rehabilitation training of hands. It should not be used for other purposes to avoid accidents
6. do not store the components in an overheated or supercooled place to avoid accidents
7. please keep the power connector dry without water. Please do not plug and unplug the power with wet hands to avoid electric shock or injury
8. do not fold the gloves forcefully to avoid damaging the software actuator and causing failure
9. do not let the product touch nails, needles and other sharp objects. When storing the product, do not place other objects on the product
10. in case of sprain, trauma, bone injury of unknown condition, severe osteoporosis, untreated fracture or people who need braking after treatment, do not use this product without professional confirmation
Product maintenance
This product is a licensed product of the original factory.
Maintenance period: 3 months
Company providing maintenance: Jieliang health care products Co., Ltd
Maintenance center data:
Address: room B3, 18/f, Vientiane industrial building, 364 - 366 Sha Tsui Road, Tsuen Wan, New Territories, Hong Kong
Contact email: info@ziglite.com
Tel.: mr.wing Li
