MENU CART {{currentCart.getItemCount()}}
ziglite-CG-Ultraviolet UVC + Ozone Sterilization-Shoe Drying Sterilizer

ziglite-CG-Ultraviolet UVC + Ozone Sterilization-Shoe Drying Sterilizer

{{shoplineProductReview.avg_score}} {{'product.product_review.stars' | translate}} | {{}} {{'' | translate}}
{{amazonProductReview.avg_rating}} {{'product.product_review.stars' | translate}} | {{amazonProductReview.total_comment_count}} {{'' | translate}}
Quantity Product set quantity
The maximum quantity per submit is 99999
This quantity is invalid, please enter a valid quantity.
Sold Out

Not enough stock.
Your item was not added to your cart.

Not enough stock.
Please adjust your quantity.

Limit {{ product.max_order_quantity }} per order.

Only {{ quantityOfStock }} item(s) left.

Please message the shop owner for order details.


Ozone sterilization and deodorization + ultraviolet sterilization + heating and drying
Sterilize and dry regularly, turn off automatically when time is up
Intelligent temperature control throughout the whole process, intelligent temperature detection with dual temperature sensors
1. Double sterilization: This product includes double sterilization-ultraviolet rays and ozone to avoid the defects of single sterilization.
a. Ultraviolet germicidal (UVC) lamps can emit ultraviolet rays with a wavelength of 253.7nm, and the sterilization efficiency is as high as 99%.
b. Thorough ozone sterilization: The dispersibility of ozone can make up for the shortcomings that ultraviolet rays can only spread in a straight line and disinfection has dead spots. It can reach any corner of the space with the air, making sterilization more effective/complete.
c. Removal of peculiar smell: Ozone with strong oxidizing effect can quickly oxidize/decompose chemical substances with odor characteristics to remove peculiar smell.
2. Drying: The product uses a special PET electric heating film polyester heating sheet, which releases heat when working to achieve the drying effect.
Range of application and best range of use: Where the shoes need to be disinfected/deodorized/dried, such as the inner liner of the shoes is leather or rubber, do not use the UV function.

Product specifications
Input power: 10w
USB port input: 4.75v~5.25v/2A
AC adapter input: 50/60Hz 90~240v/0.3A
Output power: 3W*2 or 2.5W*2
Working voltage: 11v+/-2v
Working current: 300mA
Average life: >3000h
Ultraviolet band: 253.7nm
Concentration: 30.2ppm+/-5%
Electric heating film: 8R+/-8%
Button function: 3 function buttons
UV function key: UV sterilization and sterilization timing selection
Heating function key: heating function start and heating timing selection
Mode stop key: stop UV mode or heating mode
Working temperature: 0-45 ℃
Packing size: 80*110*133mm
Product weight: 142g
Package weight: 314g

a. Enter standby mode
1. Put the two heat dissipation modules of the shoe dryer into two shoes respectively;
2. Insert the USB cable into the power bank or AC adapter; Note: The output power of the power bank or AC adapter must be greater than 10W (5V/2A), otherwise it will not work normally;
   If “LO” appears, it means that it is working abnormally. Please replace the power bank or AC adapter;
   The controller time flashes "00", indicating that the power is turned on and it is in the standby state.
b. UVC working mode
①. Short press the UV function button, the first time is 15 minutes, and the second time is 30 minutes;
②. After the timing time is selected, the blue UV function indicator lights up, the buzzer in the controller will emit a "beep", and the UV lamp starts to work, emits light blue light, and starts the countdown of the selected time. The guard begins to disinfect and displays the remaining time in the window;
③. After the timer expires, it will automatically exit the UV mode and return to the standby mode.
c. Heating and drying mode
①. Short press the heating function button, and select 30 minutes, 60 minutes, 120 minutes, 4H, 6H, 9H, 12H;
②. After the timing time is selected, the red heating function indicator lights up, the buzzer in the controller will emit a "beep" and the heating element starts to work at the same time;
    Start the countdown of the selected time, you can dry for a long time without being guarded, and display the remaining time in the window;
③. After the timer expires, it will automatically exit the heating mode and return to the standby mode.
d. Heating and UVC mode are turned on at the same time
①. When already in heating or UV mode, short press another mode control key to enter dual mode state;
②. In the dual mode state, the function indicator and the fixed time are displayed alternately; when the corresponding function indicator is on, the corresponding timing time is also displayed at the same time;
③. Because UV work also generates heat, in the dual mode state, the heating function needs to stop the UV function before it starts automatically until the timer expires to ensure that the object will not be damaged due to excessive heat.
e. In any working mode, press the stop key to exit the working mode and return to the initial standby mode.

⑴ In the absence of protective measures, ultraviolet rays can cause direct harm to humans. Please disinfect without humans and animals. When the ultraviolet lamp is on, do not look directly at the ultraviolet lamp. If symptoms such as tingling and discomfort occur, please be urgent Seek medical attention.
⑵ Ultraviolet rays and ozone can damage leather and rubber products. Avoid prolonged contact with leather or rubber products. Ozone has the function of deodorizing and sterilizing and has an impact on green plants. It is used in a closed environment. People and animals must leave until the ozone disappears. , And then go in.
⑶ Operate the power supply without wet hands to avoid electric shock.
⑷ Non-toy products, do not play with children, please keep them out of reach.
⑸ It is forbidden to collide with sharp hard objects or be hit by heavy objects to avoid damage to the UV bulb.
⑹ In order to reduce the influence of ultraviolet rays, the surface of the bulb should be wiped off with alcohol cotton frequently (usually once every eight weeks), and the dirt and grease on the bulb should be removed.
⑺ To replace the UV bulb or mobile sterilizer, be sure to cut off the power before plugging in the power cord; do not discard the old bulb at will, and follow the "non-recyclable" process.
⑻ This product should be sterilized within the scope of application, generally kept for 1-30 minutes, do not sterilize for a long time to avoid damage to the items.

Additional details

Customer Reviews

{{'product.product_review.no_review' | translate}}

Related Products