{{ 'fb_in_app_browser_popup.desc' | translate }} {{ 'fb_in_app_browser_popup.copy_link' | translate }}
{{ 'in_app_browser_popup.desc' | translate }}
{{word('consent_desc')}} {{word('read_more')}}
{{setting.description}}
{{ childProduct.title_translations | translateModel }}
{{ getChildVariationShorthand(childProduct.child_variation) }}
{{ getSelectedItemDetail(selectedChildProduct, item).childProductName }} x {{ selectedChildProduct.quantity || 1 }}
{{ getSelectedItemDetail(selectedChildProduct, item).childVariationName }}
Categories
Product specification
Model: WCF
Material: anodic aluminum alloy
Height adjustment: 4 gear
Armrest height: 83.5-91cm
Armrest width: 30cm
Length of base: 51.5cm
Base width: 46cm
Maximum bearing capacity: 136kg
Net weight: 1240 g
Packing size: 47*41.5*18cm
Gross weight: 2 kg
Not enough stock.
Your item was not added to your cart.
Not enough stock.
Please adjust your quantity.
{{'products.quick_cart.out_of_number_hint'| translate}}
{{'product.preorder_limit.hint'| translate}}
Limit {{ product.max_order_quantity }} per order.
Only {{ quantityOfStock }} item(s) left.
1. Figure 8 landing, double support to prevent wear, safe and stable, anti knock
2. Four-stage support rod, wrapped with soft foam
3. Foam non-slip cover + anodic aluminum alloy, waterproof, non-slip, easy to clean
4.4 Gear lifting height, easy adjustment, can be adjusted to the most comfortable height
Instructions for
1. Take the left/right of the bottom bend and the supporting bend, and align the short end of the supporting bend with the hole to form an outer eight shape. Get four carriage screws and an open wrench from the screw package, and the carriage screw take out the nut and the arc washer. Insert the square hole into the hole of the outer bend pipe and the ground bend pipe, put back the arc gasket and nut in turn, and then tighten the four screws with an open wrench.
2. Take out the parallel pipe and place it between the left pipe and the right pipe of the supporting bend installed in the preceding steps, and align it with the bottom hole. Take out the screws and wrap two round-headed cross screws, and lock the parallel pipe.
3. Take the handrail assembly, press down the copper bead from the protruding part of the handrail pipe toward the bottom elbow, and insert it into the left and right pipe openings of the elbow. According to personal habits, adjust the height of the handrail assembly to make the copper bead completely pop out after the adjustment is completed.
4. Tie the rail straps to the corresponding positions.
5. When using, do not push or pull the product to the left or right, otherwise there will be a risk of rollover.
Tips:
1. Before use, please check whether the screw is loose, whether the screw device is damaged, whether the back or armrest or support is firm or damaged.
2. In order to maintain environmental hygiene, please clean the toilet in time after use, wash and dry it for next use.
Packing list
Screw package *1, support tube *1 on the left, support tube *1 on the right, parallel tube *1, handrail bag *1, bottom bend tube *1, handrail assembly *1
Contact us
Office Phone / (852) 54622626
Whatsapp Inquire / (852) 54622626
Email / info@lon10.com.hk
Customer service
Delivery service method
Payment service method
Return policy
Terms and conditions
Return Policy | Terms and Conditions | 2020 © Brand Name