1. Small size, light weight, easy to carry
2. Fashionable appearance, one click measurement anytime, anywhere
3. Using soft silicone film, it can better adjust the shape of fingers
4. Automatic exit, no finger state for 8 seconds, automatic shutdown, energy-saving and power-saving
4. Bluetooth connection, APP Instantly display the monitor's blood oxygen (SpO2), heart rate (PR), and perfusion index (PI), and save the measurement data for easy viewing and sharing at any time
Packing List
Tester * Product Manual
Operation Instructions:
1. Remove the product and install two No. 7 batteries in the back battery box
2. Download the QR code provided on the packaging box APP, Turn on your phone's Bluetooth and connect to the corresponding detector.
3. One click power on: One click power on function, easy to operate
4. The correct measurement is to place the nail cover facing upwards in the testing position of the oximeter, turn on the switch, and the blood pressure monitor will automatically test and display the results
5. After turning on, press the power button briefly to switch the display direction
Notes:
1. Not with MRI or CT Device sharing
2. Explosion hazard: Do not use this instrument in flammable anesthetic gas environments
3. The oximeter only plays an auxiliary role in patient diagnosis. Please have the doctor make a diagnosis based on clinical manifestations and symptoms
Always check the sensor test point of the blood oxygen meter to confirm that the patient's skin at the sensor test point is intact and has good circulation
5. The sensor of the fingertip pulse oximeter is not suitable for contact with adhesive tape, which may result in measurement data errors or the perception of blisters on the tested skin.
6. The blood oxygen saturation meter does not have a blood oxygen prompt function, but cannot monitor continuously for a long time
7. During long-term use, please regularly replace the testing points according to the patient's different conditions. The testing point must be repositioned at most every 2 hours and the patient's skin integrity, circulation, and proper adjustment must be checked
8. High pressure disinfection, ethylene based oxidants, or immersing sensors in liquid disinfectants may result in incorrect readings
9. Disruption of important indicators of hemoglobin, such as carboxyhemoglobin or hemoglobin, can lead to incorrect readings
10. Excessive intravascular staining, such as indigo green or methylene blue, can lead to incorrect readings
11. Strong light in the surrounding environment can affect the measurement accuracy of blood oxygen saturation. (such as wiping or direct sunlight), if necessary, add a protective shell to the sensor
12. Unexpected movement of patients can lead to incorrect readings
13. Interference from high-frequency signals or defibrillators may result in incorrect readings
14. Rhythmic venous pulsation can lead to incorrect readings
15. Patients with severe hypotension. Severe anemia or hypothermia can lead to incorrect readings
If the patient uses cardiac stimulants after the heart stops beating. Or if the patient trembles. This can lead to incorrect reading
17. Bright nails or nails painted with nail polish will cause reading errors
18. The recyclable accessories or accessory components in the equipment specified in the manual, including batteries, should comply with local laws and regulations.
