Model: 7120
★ Diffuse reflective lighting design, avoiding eye discomfort caused by night lights looking directly at the light, with soft and non irritating lighting
★ Two brightness levels are available, full bright and half bright, to meet different brightness requirements
★ Multiple space applications, freely grouped to meet the needs of your house
★ Magnetic suction everywhere, no wiring or punching, easy to remove and place
Packaging list: 3 lamp bodies, 2 USB power cables, 4 iron sheets, English instruction manual
Operating instructions:
1. Attach the iron plate to the magnet on the back of the lamp.
2. Tear off the 3M adhesive sticker and stick the lamp onto the facade that needs to be installed. Reminder: 3M adhesive cannot be reused. Before pasting, please make sure to wipe the installation position and accessories clean. Do not stick it to dusty, slag, damp, or uneven surfaces.
Function Description:
1. Power switch: defaults to "OFF", at which point the power is turned off; Move to the middle to semi bright mode, light up for 1 second, then gradually turn off and enter sensing mode; Switch to "●" to fully on mode, light up for 1 second, then gradually turn off and enter sensing mode.
2. Linkage switch:
① Select any light as the main light, long press the pairing button to start pairing, and the light will be in a breathing state;
② Select other lights as sub lights, press the pairing button briefly to start pairing. At this time, the light will flash quickly. When the light turns on for 2 seconds, it indicates successful matching;
③ When pairing needs to be ended, short press the pairing button of the main light, and the light will light up for 2 codes, indicating that the pairing of the same group of lights has ended, and enter the linkage sensing mode. If there is no operation for 5 minutes during the operation process, it will automatically enter the linkage sensing state;
④ Within the sensing distance, if any light is on, all linkage lights belonging to the same group will be on;
⑤ When the lamp senses that a person has left for about 20 seconds, the light will automatically turn off;
3. Select any successfully paired lighting fixture, double-click the pairing button, and the linkage mode will be turned off. This lighting fixture can work independently; Double click the pairing button again to restore linkage mode.
4. Press and hold the pairing button for 5 seconds before automatically clearing the match. After successful clearing, the light will remain on for 2 seconds; If you need to link again, please pair again to enter linkage mode.
Notes:
*For first use, it is recommended to charge for 2-3 hours first; This product comes with overcharge and discharge power protection.
*Please do not place the lighting fixtures in high temperature, flammable, or damp places.
*It is prohibited to disassemble, collide, squeeze or throw into fire.
*If severe swelling occurs, do not continue to use.
*When not in use for a long time, it should be fully charged and the power switch should be moved to the power off position (OFF) for storage, and replenished every three months.
♥ During the transportation process, there may be occasional collisions and squeezing of the outer box, but it does not damage the integrity of the inner box product. If the outer box is strictly required to be intact, please consider carefully. Small dirt, loose threads, residual glue, washable dirt, creases and damages on the outer packaging, which do not affect the functionality of the product, are not considered defects or quality issues; We do not accept refunds or returns. Please understand!
♥ There may be some color difference in the product images, and the dimensions are measured manually. The images and dimensions are for reference only, and there may be errors. The actual color and style of the shipped product shall prevail.
♥ Refunds will not be accepted due to any issues such as color, style, size, packaging, etc. The size of the products is measured by hand, and there may be errors!
