1. Constant speed operation, stable and secure, easy to exfoliate dead skin
2. It can be removed and washed with quick dry grinding head. It can be washed clean and dried in a ventilated place
3. One key operation, easy to use, save time and effort
4. Four cleaning modes: soft cleaning, moderate cleaning, deep cleaning, pulse cleaning
Instructions for
1. Install the quartz grinding head on the body correctly;
2. Soak your feet in warm water for more than 8 minutes to fully soften the cutin, and then dry your feet;
3. Long press the switch button to start the machine. The soft cleaning mode is started by default, and the corresponding indicator is steady on. Click the switch button to adjust the mode according to your own situation. (It is recommended to start with soft cleaning mode for the first time, and change to other modes after adaptation);
4. Gently slide the grinding head back and forth on the foot, stay on the hard dead skin for 2-3 seconds, the hard dead skin will fall off automatically;
5. Long press the switch button to turn off the power supply after use, and clean the quartz grinding head;
6. Wash the feet with clean water after grinding the dead skin, and wipe the feet with an appropriate amount of moisturizer.
Quartz grinding head installation/removal method:
Installation device: tilt the quartz grinding head, align the thin clip head to the fuselage buckle hole, and pull the other side gently outward, and the two sides of the thin clip head into the fuselage buckle hole, will not fall, the installation is complete.
Disassembly: PRESS and hold the release button of the grinding head, and pull one side of the quartz grinding head upwards to remove the grinding head. Do not pull out the grinding head directly with strong force.
Matters needing attention
Please do not press the grinding head hard for a long time to polish, so as to avoid overheating and damage to the motor!
1. Please do not overcharge. Please connect the power in time after charging.
2. It should be charged in a dry environment, do not use wet hands to link the charging line, please turn off the machine power before charging, please charge in the closed state;
3. Do not allow children to use the product or lick the product, otherwise it may lead to accidents.
4. Do not immerse the body in water or use the faucet for washing the machine for a long time;
5. In case of skin or body pain or abnormality, please stop using immediately;
6. Please stop using the machine immediately in case of abnormal heating, so as to avoid safety accidents;
7. After use, please turn off the power switch and store it in a dry and ventilated place;
8. For normal use and hygiene, please remove the grinding head after each use and clean the grinding head;
9. In order to keep the quartz grinding head clean and removable, please do not wash the body of the product, otherwise it may cause short circuit;
10. Do not disassemble or repair the product by yourself;
11. When not in use for more than seven days, separate the connection between the fuselage and the charging cable, and be sure to turn off the power for safekeeping;
12. Do not use the battery until it is completely discharged. It is recommended to charge it at any time before use.
13. The battery must be removed from the appliance before discarding it. When removing the battery, the appliance must be powered off;
14. Batteries should be disposed of safely. Put them in a non - reusable bin. Do not throw them away carelessly to avoid causing environmental pollution.
Cleaning and maintenance:
1. Check whether the power supply is turned off. After turning off the power supply, wipe the fuselage with a semi-dry and non-dripping rag;
2. Do not wash the body with water: the instrument may be faulty. Please wipe it with dry cloth or soft cloth dipped in a little soapy liquid.
3. Remove the quartz grinding head correctly, clean it with water, and dry the water before installing it on the fuselage;
4. Do not wipe the body with corrosive solution: Do not wipe the body with alcohol, water, gasoline, or nail polish remover. This may cause product faults, cracking or discoloration of parts.
Packing list
Main body *1, USB power cable *1, manual *1
