1. Small size, light weight and easy to carry
2. Fashionable appearance, one key measurement anytime, anywhere
3. Soft silicone film is adopted, which can better adapt to the shape of fingers
4. Automatic exit, no finger state for 8 seconds, automatic shutdown, energy saving and power saving
5. With Bluetooth connection, APP displays the monitor's blood oxygen (SpO2), heart rate (PR) and blood perfusion index (PI) in real time, and saves the measured data, which can be viewed and shared at any time
Operating instructions
Please read the operating instructions carefully before use
Take out the product and install two No. 7 batteries in the back battery box
One button boot: one button boot function, easy to operate
The correct measurement is to place the nail cap on the test position of the oximeter, turn on the switch, and the sphygmomanometer will automatically test and display the results
After power on, short press on / off to change the display direction
matters needing attention
1. not shared with MRI or CT equipment
2. explosion hazard: do not use this instrument in flammable anesthetic gas environment
3. The oximeter only plays an auxiliary role in patient diagnosis. Please ask the doctor to make a diagnosis according to the clinical manifestations and symptoms
4 always check the sensor test point of the oximeter to confirm that the patient's skin at the sensor test point is complete and the circulation is good
5. the sensor of the fingertip pulse oximeter is not suitable for contacting the adhesive tape, which may lead to incorrect measurement data, or it may be considered that the measured skin has blisters.
6. The blood oxygen saturation meter has no blood oxygen prompt function, but it cannot be monitored continuously for a long time
7. For long-term use, please change the test points regularly according to the different conditions of patients. The test points must be repositioned at most every 2 hours and the patient's skin integrity, circulation and proper adjustment must be checked
8. high pressure disinfection, vinyl oxidizer or immersion of the sensor in a liquid disinfectant may cause incorrect readings
9. Disorder of important indicators of hemoglobin, such as carbohemoglobin or hemoglobin, can lead to wrong readings
10. Excessive intravascular staining, such as indigo green or methylene blue, can cause incorrect readings
11. the strong light of the surrounding environment will affect the measurement accuracy of blood oxygen saturation. (e.g. wiping or direct sunlight), add a protective housing for the sensor if necessary
12. The patient's unexpected movement will lead to wrong readings
13. Interference from high-frequency signals or defibrillators may cause incorrect reading
14. rhythmic venous pulsation may cause incorrect reading
15. Patients with hypotension have severe hypotension. Severe anemia or hypothermia can cause incorrect readings
16. If the patient uses cardiotonic after the heart stops beating. Or if the patient trembles. This can lead to incorrect reading
17. bright nails or nails coated with nail polish may cause incorrect readings
Recyclable accessories or accessory components in the equipment specified in t
