1. Simulate muscle drive training to avoid secondary injuries
2. Using fully automated design, loop training is helpful to promote the recovery of hand muscle strength
3. Enhance control force through mirror training, stimulate neural units, and promote the recovery of brain function and hand function
4. It can be trained by professional institutions or self-training at home, with simple and convenient operation.
Instructions for
1. Put the trainer host on the desktop, do not put on the wet, soft cloth surface, unclean desktop
2. Connect the air pipe of the training glove to the air pipe connector of the trainer host. (During mirror training, connect the USB connector of the mirror glove to the interface of the mirror glove)
3. Insert the DC plug of the power adapter into the DC plug of the trainer. Note: When connecting the training gloves, rotate the air pipe connector clockwise and tighten it to the corresponding interface of the host
4. The guardian should help the patient put on the gloves, extend the finger to the top of the finger cover, and then pull the glove Velcro to the wrist to tighten the glue (Note: the affected hand is in the "functional position" or "neutral position" during training, do not be in the rest position)
5. Flip down the "Power switch" button of the trainer host to "On", and the "Power switch" button becomes bright
6. Press the start/stop button to start and pause the training at any time (Note: During the training in mirror mode, the healthy hand should hold the mirror glove button to start the training glove grasping movement, and release the mirror glove button to start the training glove stretching movement)
7. Toggle up the "power switch" button of the trainer host to close, and the machine will stop using after power failure
8. The training time for each startup is 30 minutes, and it will stop automatically when the time is up
9. Press the strength button to increase or decrease the strength, a total of 5 levels can be adjusted, can be adjusted according to their own
Matters needing attention
Please read the instructions carefully before use and follow the instructions strictly
1. Do not disassemble, repair, or modify the parts of the device to avoid abnormalities of the trainer
2. Do not store any parts in or near the water heater, microwave oven, cooking equipment or high-pressure container to avoid fire caused by overheating
3. Can not be sterilized or autoclaved, do not continue to use when the alarm prompts
4. Please prevent liquid or foreign matter from entering the trainer. Do not store it in the environment of disinfection gas or active gas to avoid damage to internal electronic components and failure
5. It is suitable for the rehabilitation training of passive and mirror movements of hands. Do not use it for other purposes to avoid accidents
6. Do not store the components in an overheated or too cold place to avoid accidents
7. Keep the power connector dry and dry. Do not plug or remove the power connector with wet hands to avoid electric shock or injury
8. Do not fold the gloves forcefully to avoid damage to the soft actuator and failure
9. Do not touch sharp objects such as nails and needles with the product. Do not place other objects on the product when keeping the product
10. For people with hand sprains, wounds, bone injuries of unknown condition, severe osteoporosis, untreated fractures or people who need to brake after treatment, do not use this product without confirmation of availability by professionals
Packing list
Host + five-way five-joint training gloves + mirror handle
