1. Full lying design high back wheelchair, 180 ° angle adjustment, flexible use and multi-functional nursing
2. The hanging feet can be folded to the rear side to get on and off safely. The sponge leg block is more comfortable
3. Lengthened handrail, adjustable height, suitable for different shapes
4. Front and rear double brakes, safer
5. The seat is widened and deepened, the frame is reinforced, and the large one is preferred
6. The dining table board is detachable, easy to install, flexible to use and easy to care
7. The wheelchair includes a pull-out bedpan, which is convenient for nursing
8. Aluminum alloy, light, strong and durable
The full lying model is suitable for people with damaged lumbar spine, inconvenient limbs, hemiplegia, sleepiness and so on
Instructions
How to deploy the wheelchair:
a. Hold the handle gloves with both hands, lift the rear wheel to make the rear wheel off the ground, and pull gently to both sides at the same time, separate the left and right frames a little (the upper edge of the cushion is straightened), and then put down the rear wheel.
b. Press down on both sides of the seat cushion with the palm of your hand until the wheelchair unfolds.
c. Lay the pedals flat and fasten the leg straps.
How to fold the wheelchair:
a. Turn the pedals up 90 degrees to a vertical position
b. Use the hand to pull the middle of the seat cushion, and the large frames on both sides of the wheelchair are slowly folded to the middle
c. Press and hold the outside of the left and right armrests and press them inward
How to use the wheelchair:
1. Ride:
a. Put the unfolded wheelchair on the flat ground, pull the standing brake, and brake the left and right rear wheels
b. Put away the pedals, move closer to the wheelchair, hold the left and right armrests and slowly put them on the seat cushion
c. After the person sits in the wheelchair, unfold the pedals, fasten the seat belt, and release the standing brake.
2. Drive
a. In the process of driving, if encountering an obstacle, the nursing staff needs to hold the handle with both hands and step on the foot cover at the same time. The front wheel is lifted to cross the obstacle. When the rear wheel encounters an obstacle, hold the handle tightly with both hands and move up Lift the rear wheel to get over obstacles
b. In the event of a large obstacle or step during driving, two people are required to grasp the large frames on both sides of the wheelchair and lift the wheelchair over the obstacle.
c. When going downhill, you must go backwards, hold the push ring with both hands, and control the downhill speed with the force. When the slope is too steep, a nurse should control it. normal implementation
d. When getting off the car, first brake the standing brake, unfasten the seat belt, put away the pedals, step on the ground with both feet, and then slowly get up and leave the wheelchair
Precautions
1. Do not put your fingers in the gap when pressing down on the seat cushion to avoid injury
2. Do not ride in a wheelchair when the standing brake is not applied to avoid bodily injury caused by the wheelchair sliding
3. Do not step on the pedals to get off and on the wheelchair, to prevent the wheelchair from leaning forward and causing bodily injury
4. Do not hold other parts to lift the wheelchair to avoid damage to the wheelchair or bodily injury
5. When going downhill, do not use the standing brake to avoid personal injury caused by rollover
6. When getting off the bus, be sure to brake the standing brake first. The standing brake is used when the user gets on and off the wheelchair or when parking, and cannot be used for braking while driving.
Care and Maintenance
a. Before using the wheelchair, check the screws of the front wheel, rear wheel, standing brake and other parts and the rear wheel spokes. If they are loose, please tighten them (due to bumps in transportation, etc., the screws of the wheelchair may become loose).
b. Check whether the inflation after the car is normal. If the air is insufficient, please inflate in time. The inflation method is the same as that of the bicycle.
c. During the use of the wheelchair, it is necessary to check the movement of various parts, whether the screws and the spokes of the rear wheel are loose every month. If it is loose, lock it in time to avoid potential safety hazards.
d. The active parts should be lubricated every week to prevent inflexible activities
e. After using the wheelchair, use a soft dry cloth to wipe the surface water vapor, dirt, etc. to prevent rust. f. The wheelchair should be stored in a dry place to avoid moisture and rust. 1. The seat cushion and night should be kept clean to prevent Breeding bacteria g. Use period: From the date of purchase, the safe use period is 5 years
